06 January 2009 - 08:27 PM   

    
    

Designed by ZedWeb Design


Guillotines, Press Brakes and Tooling - Hydraulic Pressbrakes

Model: MVD Inan HAP Hydraulic Pressbrakes
Hydraulic Pressbrakes

To enquire about this product - click here

Click on images for a larger view
Other Models in this Category:
Tooling
- 88 Degrees
- 85 Degrees
Hydraulic Pressbrakes
- MVD Inan Hydraulic Pressbrake
- MVD Inan CNC Hydraulic Pressbrake
Hydraulic Guillotines
- MVD Inan Hydraulic Guillotine Shears


General Characteristics

  • Steel machine frame and top beam dimensioned for optimum strength and minimised deflection.
  • The whole body is designed and built as welded one piece frame and machined at one time on a moving column CNC machining centre guaranteeing maximum precision for paralellism of cylinders, slideways and perpendicularity to table and torsion bar axis.
  • Hydraulic cylinders are machined from a solid steel billet and honed precisely.
  • Pistons are steel forgings, hardened, chrome plated, precision ground and micropolished for years of trouble-free service.
  • Compact hydraulic block with pressure relief valves for safety.
  • The torsion bar and stopper system inside cylinders enable parallel move of the top beam and accurate bend angle at both ends of the work piece.
  • Pre-fill valves enable top beam to approach the work piece rapidly after, and return rapidly after bending. Bending is performed at slow speed under control according to CE norms.
  • Hardened ram slideways working with low friction and wear resistant material and optimum lubrication grooves.
  • Pressure switch limits bending and activate automatic return of top beam to top dead centre.
  • Top quality Busak Shamban seals and o-rings for long duration problem free operation.
  • High quality hydraulic fittings.
  • High pressure and silent Recroth hydraulic pumps.

 

MVD INAN Press brakes have top quality bending feature due to the parallelism between top and bottom tool in vertical and also in horizontal direction throughout the length.



Technical Specifications


Standard Equipment

  • Motorised cylinder stopper control system.
  • Digital display and push buttons for backguage and cylinder stopper positioning.
  • Motorised rigid backguage (X axis) system with ball screw and special design guiding system with minimised lubrication.
  • Longitudinal (Z axis) and vertical (R axis) adjustment of backguage system.
  • backguage positioning fingers move along linear slideways and has depth adjustment facility of +/- 0.05mm tolerance for exact parallelism.
  • Back guage fingers with two guaging steps used one for short and the other for long bending depths. Fingers have fold up feature.
  • Two laterally adjustable front support arms with slot for height adjustment and slot for front stop.
  • Swinging control panel with necessary buttons and controllers.
  • Ram stroke switches for mute point and top dead centre.
  • T slots on both sides of the table.
  • Functional foot pedal.
  • PLC based compact and reliable electrical system.
  • World known electrical and safety components like Telemechanique, Merlin Gerin legrand, Siemens.
  • Selection of metric or inch measuring system.
  • Side safety guards according to safety regulations.
  • One piece top and bottom tool (not hardened).
  • Operator's manual.
Optional Equipment
  • NC System Alternatives
  • Elgo 8822, Nuova, Burel 2 axis position control units.
  • Amada Preomecam type top tool holding systems with micro height adjustment facility assuring accurate bend angle at full length and throughout the machine life. (Applicable to all machines any time in the future.)
  • Full conformity with EC machinery directive for safety and certified CE marking.
  • Front light barrier or laser systems assuring optimum safety conditions for operators and third parties at tools area.
  • Manual or motorised bottom table anti deflection compensation system for optimum bend angle precision throughout the full bending length.
  • Rear safety guards according to safety regulations.
  • Additional backguage fingers.
  • Top quality hardened and ground top and bottom tools of various sections.
  • Special daylight openings upon customer request.
  • Larger throat depths like 400-1000mm. for different capacity machines.
  • Cooling system for hydraulic oil.
  • Ventilation or air conditioning system for electrical cabinet.
  • Optimum solutions for comlex work piece bending with special tools upon customers request.
  • Larger backguage strokes up to 1000mm.
  • Special design tables according to customer needs.




BMC Equipment & Tools Ltd.
Unit 4A Summerhill Enterprise Centre, Summerhill, Co. Meath
Ph: 046 955 8121 Fax: 046 955 8122 Email: bcarleton@bmcequip.com