Designed
by ZedWeb Design |
|
Guillotines,
Press Brakes and Tooling - Hydraulic Guillotine Shears
Model:
MVD Inan Hydraulic Guillotine Shears
Hydraulic Guillotine Shears
To
enquire about this product - click
here
Click
on images for a larger view
|
|
 |
| |
- Welded one-piece steel frame using rigid structural steel.
- The one-piece welded frame is machined at one time on a moving column CNC machining centre and this maintains maximum cutting accuracy.
- Special MVD INAN design that double speed operation is maintained. Slow approach for maximum accuracy.
- Hydraulic cylinders are machined from a solid steel billet and honed afterwards.
- Pistons are steel forgings, precision ground and micropolished for years of trouble-free service.
- Hydraulic cylinders in series connection and easily serviceable.
- World brand low-maintenence hydraulic block with pressure relief valves.
- Side frame contruction with throat allowing continuous slitting of strips up to 250mm width.
- Powerful holddown cylinder to avoid the sheet sliding during cutting.
- Backguage bar which swings with the top beam to prevent material from jamming.
- Automatic swing-up feature of backguage after 1000mm to feed longer sheets easily.
|
| |
| Standard Equipment (for HGM and HAGM) |
- Fast and powerful motorised backguage with 1000mm length moving by ballscrewed shafts.
- Digital (Burel) position controller (cut length, cut width, cut number, program no control).
- Blade gap adjustment for a good, square, burr-free cut and for increased blade life the blade gap must be adjusted to suit blade thickness. Adjustment is made fast and simple with the single arm and itrs graduated markings.
- Cutting legnth can be adjusted from the control panel so that the blade does not need to complete the entire cycle. This feature savestime and gives greater number of strokes per minute.
- Roller bearings on the table to help feeding sheets to the machine easily.
- Three T-slotted front support arms with ruler and flip over stops.
- Foot pedal control cutting operation.
- Moveable lower blade support for accurate blade gap adjustment for the long term.
- Finger guard through the table, side and rear guards.
- Complete electrical switch board and control panel for 400 V AC 3 phase and 50 Hz.
- Oil tank level indicator.
- Operator's manual.
- CE conformity including rear light beams.
|
|
|
Technical
Features
Click
image to view larger size image
Back
To Top ^
|
|
|
BMC
Equipment & Tools Ltd.
Unit 4A Summerhill Enterprise Centre, Summerhill, Co. Meath
Ph: 046 955 8121 Fax: 046 955 8122 Email: bcarleton@bmcequip.com
|
|
