Standard Equipment

• Control of the following 3 or 4 axis: Y1, Y2, X, (R)
• Delem DA51, DA56 or Cybelec DNC 60, DNC 880 or ESA/gv mod 2004, mod 2005.
• Synchromisation of Y1+Y2 axis utilising optic linear encoders within a tolerance of +/- 0.005mm
• Backguage system with X and/or R axes driven by AC drivers and servo motors on linear guides.
• Original Bosch-Rexroth or Hoerbiger servo hydraulic systems with differing types for different pressing capacities.
• Standard table with T channels and standard bottom tool clamping.
• Ergonomic swinging control panel.
• Muloti-functional foot pedal with necessary buttons.
• Two laterally adjustable front support arms with slot for height adjustment and slot for front stop.
• Backguage positioning fingers move along linear bearings with +/- 0.01mm postioning tolerance.
• Back guage fingers with two guaging steps used one for short and the other for long bending depths.
• Micro adjustment facility for exact parallelism of back guage fingers.
• Side safety guards according to safety regulations.
• World known electrical and safety components like Telemechanique, Merlin Gerin Legrand, Siemens.
• Automatic indexing of all axes at first start.
• Automatic pressing force determination according to material, sheet thickness, bending length and bottom tool V opening.
• Standard hardened top tool model 10.10 in 835mm pieces.
• Standard Mutti V bottom in fill bending length.
• Operator's manual.

• Full conformity with EC machinery directive for safety and certified CE marking.
• Amada Promecam type top tool holding system with micro height adjustment facility assuring accurate bend angle at full length and throughout the life of the machine.
• Manual botton table anti deflection system for optimum bend angle precision throughout the full bending length.
• Motorised centrak table anti-deflection system, which compensates deflection automatically according to bending force, bend length, tool vee size and material thickness.
• Front light barrier assuring optimum safety conditions for operators and third parties.
• Laser protection systems at tools area instead of two-hand control or light barrier systems. These systems are Akas or Laser safe systems which increase productivity while maintaining safety.
• Different CNC unites like Cybelec Modeva 10, Modeva 12, Modeva 15 and Delem DA 69W with 2-D graphical display options.
• Additional control for back guage axes like Z1+Z2, R1+R2 and X1+X2
• Promecam type table and botton tool clamping system or lower tool holder for 60mm in tool width.
• Roller guide and rail system for easy lateral movement of front support arms.
• Rear light guards instead of rear guards.
• Delem V-bend software.
• Cybelec Modeva colour graphics with CYCAD, PC 1200 & Lucia softwares.
• Bend angle measurement system with integrated solution for calculation of correct bottom dead centre at first bend without scraping at sample bending operations.
• Pneumatic top tool holding system.
• Hydraulic top and botton tool clamping system.
• Control of front arms in longitudinal axis, vertical axis and rotational axis to support the sheet before and during bending operation.
• Central motorised lubrication system.
• Hydraulic oil coolant system.
• Special throat depths like 400mm, 500mm, 600mm, 750mm and 1000mm
• Special top and botton tools of various sections upon customer requests.